AIM-M200 Insulation Monitoring Device

● Accurate Insulation Resistance monitoring

● Load&Temperature monitoring for Insulation Transformer

● Prompt Alarm with Relay Output and LED Indicator once Insulation

Fault or IT System Devices Disconnection happened

● Smart HMI for convenient Parameter&Alarm Setting and Self-test

● Support Insulation Fault Location Function

● RS485&CAN bus Communication

● IEC 60364-7-710:2002;IEC62020-1:2020; EMC

Product Detail

Accurate Insulation Resistance monitoring

● Isolation Measuring Range：10~999Ω

● Relative Tolerance：0~±10%

● Display Method：value&percentage display

Load&Temperature monitoring for Insulation Transformer

● Thermistor: PT100

● Temperature Measuring Range: -50℃~+200℃

● Residual Current Measuring Range: 2.1~50A

● Accuracy: 5%

AMI-M200 monitor load and temperature of insulation transformer

Prompt Alarm with Relay Output and LED Indicator once Insulation Fault&IT System Devices Disconnection happened

● Response Time:<2s

● LED Indicator：Insulation Fault&Overload&Over-temperature Alarm; Connected Device status (on-off)

● Alarm Relay Output: 2 relay output (non-programmable)

LCD display and relay output terminal of AIM-M200 Hospital Insulation Monitoring Device

Smart HMI for convenient Parameters&Alarm Setting and Self-test

● Alarm Threshold Value Setting

● Response Time setting

● Self Test

Keypads HMI illustration

Parameters/Model		AIM-M10	AIM-M100	AIM-M200
Auxiliary power	Voltage	AC220V(±10%)		DC24V(±25%)
	Frequency	50/60Hz		—
	Power consumption	<5VA	< 8VA	<3VA
Insulation monitoring	Insulation resistance measurement range	10～999kΩ
	Accuracy	0～±10%
	Alarm value range	50～999kΩ
	Response time	<2s
	Measuring voltage	<12V
	Measuring current	<50uA
Current Monitoring	Measurement value	2.1～50A
	Alarm value range	5～50A
	Accuracy	5%
	Display method	Value display	Percentage display	Value and percentage display
Temperature Monitoring	Sensor	PT100
	Measuring range	-50～+200℃
	Alarm value range	0～+200℃
Power output	24VDC	2W	None
Alarm Output	Output	1 relay	2 relay(programmable)	2 relay (not programmable)
	Contact Capacity	AC 250V/3A DC 30V/3A
Communications		1 RS485 , Modbus-RTU	2 RS485 , Modbus-RTU	1 RS485, Modbus-RTU
				1 CAN, custom protocol
Environment	Operating temperature	-10～+50℃
	Storage temperature	-20～+70℃
	Relative humidity	5%-95%，No condensation
	Altitude	≤2500m
Rated impulse voltage / pollution degree		4KV/3
EMC & EMR		IEC61326-2-4

Note: Price below Only for Reference, Contact us for your Best Quotation !!!

Shape	Type	Function	FOB Shanghai(USB)	Module Price(USD)
	AIM-M10	Monitoring the insulation resistance of IT system;Relay output	1776	1 Double communications+1302 Fault alarm output+64 3 Temperature monitoring+130 4 Load monitoring+130 5 Centralized monitoring software+482 6.Disconnection monitonng+130 7 SOE+322 8 Self-test* 160
	AIM-M100		2310
	AIM-M200		2900
	ACLP10-24	DC24V linear power supply module.	44
	HDR-60-24	DC24V power supply module.	66
	AIL150-4	Locate up to 4 fault branches with ASG150.	896
	AIL 150-8	Locate up to 8 fault branches with ASG150.	1150
	ASG150	Generate location signal when insulation fault occurs,locate fault branches with AIL150; L1/L2 disconnection alarm.	560
	AID10	Alarm when fault occurred: Matching with AIM-M10.	88
	AID120	Display the insulation resistance and load rate in real time;Alarm with LED display when fault occurred; Matching with AIM-M100.	132
	AID150	Remote monitoring up to16 sets of insulation monitors by RS485;Remote setting and self-test, 20 fault records;	132
	AID200	Remote monitoring up to16 sets of insulation monitors by CAN bus;Remote setting and self-test; 20 fault records; Matching with AIM-M200.	132
	AIM-R100	12 channels residual current;1 relay output; 20 fault records; 128*32 bits LCD; RS485(Modbus-RTU); Response range:6mA-1A	1296
	AKH-0.66P26	Protective current transformer (used with AIM-M series);Max current: 50A; Current ratio: 2000:1.	22
	AKH-0 66/L-20	Residual current transformer (used with AIM-R100); Max current: 100A; Current ratio: 2000:1.	22